Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 管理员指南
Security Management
312
Managed Switches
Web Interface: Configure a Protected Port to Isolate Ports
on the Switch
on the Switch
1.
Create a DHCP pool:
Note:
This example assumes that the DHCP service is enabled. For
information about how to enable the DHCP service, see the web
interface procedure in
information about how to enable the DHCP service, see the web
interface procedure in
a. Select System > Services > DHCP Server > DHCP Server Configuration.
A screen similar to the following displays.
b. Under DHCP Pool Configuration, enter the following information:
•
In the Pool Name field, select Create.
•
In the Pool Name field, enter pool-a.
•
In the Type of Binding field, select Dynamic.
•
In the Network Number field, enter 192.168.1.0.
•
In the Network Mask field, enter 255.255.255.0.
•
In the Days field, enter 1.
•
Click Default Router Addresses. The DNS server address fields display. In the
first Router Address field, enter 192.168.1.254.
first Router Address field, enter 192.168.1.254.
•
Click DNS Server Addresses. The router address fields display. In the first DNS
Server Address field, enter 12.7.210.170.
Server Address field, enter 12.7.210.170.
c. Click Add.