Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 管理员指南

This example is provided as CLI commands and a Web interface procedure.

To mover the stack master to a different unit number, issue the movemanagement 
<fromunit-id>  <tounit-id>

 command.

The operation takes between 30 seconds and 3 minutes, depending on the stack size 
and configuration.

Make sure that you can log in on the console that is attached to the new master. 

To verify that all units rejoined the stack, issue the show switch command.

Reset the stack by issuing the reload command.

To mover the stack master to a different unit number, issue the following CLI command:

Select System > Management > Basic > Stack Configuration. 

A screen similar to the following displays.

In the Management Unit Selected menu, select 2.

A warning window displays. 

Click the OK button.

Click Apply to save the settings.

If the master receives its IP address from a DHCP server and you 
move the master to a different unit, its IP address might change and 
you could lose the connection to the switch.

(Netgear Switch) (Config)#stack

(Netgear Switch) (Config-stack)#movemanagement 1 2