Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 管理员指南
RIP
95
Managed Switches
3.
Enter the following information:
•
For RIP Admin Mode, select the Enable radio button.
•
In the Send Version field, select RIP-2.
4.
Click Apply to save the settings.
Configure VLAN Routing with RIP Support
Routing Information Protocol (RIP) is one of the protocols that routers can use to exchange
network topology information. It is characterized as an interior gateway protocol, and is
typically used in small to medium-sized networks.
network topology information. It is characterized as an interior gateway protocol, and is
typically used in small to medium-sized networks.
Figure 12. VLAN routing RIP configuration example
This example adds support for RIPv2 to the configuration created in the base VLAN routing
example. A second router, using port routing rather than VLAN routing, has been added to
the network.
example. A second router, using port routing rather than VLAN routing, has been added to
the network.
CLI: Configure VLAN Routing with RIP Support
1.
Configure VLAN routing with RIP support on the switch.
(Netgear Switch) #vlan data
(Netgear Switch) (Vlan)#vlan 10
(Netgear Switch) (Vlan)#vlan 20
(Netgear Switch) (Vlan)#vlan routing 10
(Netgear Switch) (Vlan)#vlan routing 20
(Netgear Switch) (Vlan)#exit
(Netgear Switch) #conf
Layer 3 switch
Router
VLAN 10
VLAN 20
Port 1/0/2 VLAN
Router port 1/3/1
192.150.3.1
Router port 1/3/1
192.150.3.1
Router port 1/0/5
192.150.4.1
192.150.4.1
Port 1/0/3 VLAN
Router port 1/3/2
192.150.4.1
Router port 1/3/2
192.150.4.1
Layer 2
switch
switch
Layer 2
switch
switch