Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 用户手册

Since a port can be configured to belong to more than one VLAN, VLAN routing might be 
enabled for all of the VLANs on the port, or for a subset. VLAN routing can be used to allow 
more than one physical port to reside on the same subnet. It could also be used when a 
VLAN spans multiple physical networks, or when additional segmentation or security is 
required. This section shows how to configure the NETGEAR switch to support VLAN 
routing. A port can be either a VLAN port or a router port, but not both. However, a VLAN port 
can be part of a VLAN that is a router port.

The VLAN Static Routing Wizard creates a VLAN, adds selected ports to the VLAN. The 
VLAN Static Routing Wizard gives you the option to add the selected ports as a link 
aggregation (LAG). The Wizard does the following:

Creates a VLAN and generates a unique name for VLAN.

Adds selected ports to the newly created VLAN and removes selected ports from the 

default VLAN.

Creates a LAG, add selected ports to a LAG, then adds a LAG to the newly created 
VLAN.

Enables tagging on selected ports if the port is in another VLAN. Disables tagging if a 
selected port does NOT exist in another VLAN.

Excludes ports NOT selected from the VLAN.

Enables routing on the VLAN using the IP address and subnet mask entered.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Routing

> VLAN > VLAN Static Routing Wizard.