Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 用户手册
OSPF and OSPFv3
373
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure the Advanced OSPFv3 Settings
To configure the advanced OSPFv3 settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > OSPFv3 > Advanced > OSPFv3 Configuration.
6.
Enter the Router ID in 32-bit integer, dotted-decimal format that uniquely identifies the router
within the autonomous system (AS).
To change the router ID you must first disable OSPFv3. After you set the new router ID,
you must reenable OSPFv3 for the change to take effect. The default value is 0.0.0.0,
although this is not a valid router ID.
you must reenable OSPFv3 for the change to take effect. The default value is 0.0.0.0,
although this is not a valid router ID.
7.
In the Admin Mode field, select Enable or Disable.
If you select Enable, OSPFv3 is activated for the switch. The default value is Enable. You
must configure a router ID before OSPFv3 can become operational. For more
information, see
must configure a router ID before OSPFv3 can become operational. For more
information, see
Note:
Once OSPFv3 is initialized on the router, it remains initialized until the
router is reset.
router is reset.