Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 用户手册
Multicast Routing
410
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the nonconfigurable data that is displayed.
Configure Multicast IGMP Settings
You can configure IGMP settings and view IGMP statistics.
Configure IGMP Global Settings
To configure the IGMP global settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> Multicast > IGMP > Global Configuration.
Table 157. DVMRP Route
Field
Description
Source Address
The network address that is combined with the source mask to identify
the sources for this entry.
the sources for this entry.
Source Mask
The network subnet mask used with the source IP address to identify
the sources for this entry.
the sources for this entry.
Upstream Neighbor
The address of the upstream neighbor (for example, RPF neighbor)
from which IP datagrams from these sources are received.
from which IP datagrams from these sources are received.
Interface
The interface on which IP datagrams sent by these sources are
received. A value of 0 typically means the route is an aggregate for
which no next-hop interface exists.
received. A value of 0 typically means the route is an aggregate for
which no next-hop interface exists.
Metric
The distance in hops to the source subnet.
Expiry Time
The amount of time remaining before this prune expires at the
upstream neighbor. If no prune messages were received from
downstream neighbors, this is set to value of the default prune lifetime
timer, otherwise it is set to the smallest received value or the default
timer, whichever is less.
upstream neighbor. If no prune messages were received from
downstream neighbors, this is set to value of the default prune lifetime
timer, otherwise it is set to the smallest received value or the default
timer, whichever is less.
Up Time
The time since the route represented by this entry was learned by the
router.
router.