Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 用户手册
Multicast Routing
424
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The valid values are from 0 to 2147483647. The default value is 1.
12.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable data that is displayed.
View the PIM Neighbor
To view the PIM neighbor:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> Multicast > PIM > PIM Neighbor.
6.
To refresh the page with the latest information on the switch, click the Update button.
Table 164. Multicast PIM Interface Configuration
Field
Description
Protocol State
The state of PIM in the router. either Operational or Non-Operational.
IP Address
The IP address of the selected PIM interface. If you enter an IPv6
address, the format is prefix/prefix length.
address, the format is prefix/prefix length.
Designated Router
The designated router on the selected PIM interface.
Neighbor Count
The number of PIM neighbors on the selected interface.