Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 用户手册
Multicast Routing
427
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure the PIM Candidate Rendezvous Point
To configure the PIM candidate rendezvous point (RP):
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> Multicast > PIM > Candidate RP Configuration.
6.
From the list of interfaces, select the Interface.
7.
Enter the Group Address transmitted in candidate-RP-advertisements.
If you enter an IPv6 address, the format is prefix/prefix length.
8.
In the Group Mask field, enter the group address mask transmitted in
candidate-RP-advertisements
9.
In the C-RP Advertisement Interval field, specify the duration in seconds at which the
C-RP messages are unicast to the bootstrap router (BSR).
The range is from 1 to 16383 seconds. The default value is 60 seconds. If this field is
submitted without any value, the default value is used.
submitted without any value, the default value is used.
10.
Click the Add button.
The candidate-RP address is added for the PIM router.