Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 用户手册
Configure Quality of Service
472
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
field in a packet is defined as the high-order three bits of the Service Type octet in the
IP header.
IP header.
•
IP ToS
. Select this option to require the packet's Type of Service (ToS) bits in the IP
header to match the specified value. The IP ToS field in a packet is defined as all
eight bits of the Service Type octet in the IP header. After you select this option, use
the following fields to configure the ToS match criteria:
eight bits of the Service Type octet in the IP header. After you select this option, use
the following fields to configure the ToS match criteria:
•
ToS Bits
. Enter a two-digit hexadecimal number octet value in the range 00 to ff to
match the bits in a packet’s ToS field.
•
ToS Mask
. Specify the bit positions that are used for comparison against the IP
ToS field in a packet.
12.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable information displayed in the Class
Summary at the bottom of the DiffServ Advanced Class Configuration page.
Summary at the bottom of the DiffServ Advanced Class Configuration page.
Configure DiffServ IPv6 Class Settings
You can add a new IPv6 DiffServ class name, or to rename or delete an existing class. You
can also define the criteria to associate with a DiffServ class. As packets are received, these
DiffServ classes are used to prioritize packets. You can use multiple match criteria in a class.
The logic is a Boolean logical-AND for this criteria. After creating a class, click the class link
to the Class page.
can also define the criteria to associate with a DiffServ class. As packets are received, these
DiffServ classes are used to prioritize packets. You can use multiple match criteria in a class.
The logic is a Boolean logical-AND for this criteria. After creating a class, click the class link
to the Class page.
To configure DiffServ IPv6 class settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select QoS > DiffServ > Advanced > IPv6 Class Configuration.
Table 183. DiffServ Class Configuration - Class Summary
Field
Description
Match Criteria
The configured match criteria for the specified class.
Values
The values of the configured match criteria.