Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 用户手册
Manage Device Security
543
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Traffic Control > Private Group > Private Group Configuration.
6.
In the Group Name field, enter the private group name.
The name can be up to 24 bytes of non-blank characters.
7.
In the optional Group ID field, specify the private group identifier.
The range of group ID is 1 to 192.
8.
In the Group Mode list, select the mode of private group.
The group mode can be either isolated or community. When in isolated mode, the
member port in the group cannot forward its egress traffic to any other members in the
same group. By default, the mode is community mode that each member port can
forward traffic to other members in the same group, but not to members in other groups.
member port in the group cannot forward its egress traffic to any other members in the
same group. By default, the mode is community mode that each member port can
forward traffic to other members in the same group, but not to members in other groups.
9.
Click the Add button.
The private group is created in the switch.
Configure Private Group Membership
To configure private group membership:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Traffic Control > Private Group > Private Group Membership.