Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 用户手册

Select the storm control settings:

 Disable or Enable radio button.

This enables or disables Broadcast Storm Recovery mode on all ports. When you 
specify Enable and the broadcast traffic on any Ethernet port exceeds the configured 
threshold, the switch blocks (discards) the broadcast traffic. The factory default is 
Enable.

 or Enable radio button. 

This enables or disables Multicast Storm Recovery mode on all ports. When you 
specify Enable, and the multicast traffic on any Ethernet port exceeds the configured 
threshold, the switch blocks (discards) the multicast traffic. The factory default is 
Disable.

 Disable or Enable radio button. 

This enables or disables Unicast Storm Recovery mode on all ports. When you 
specify Enable, and the unicast traffic on any Ethernet port exceeds the configured 
threshold, the switch blocks (discards) the unicast traffic. The factory default is 
Disable.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Security > Traffic Control > Storm Control > Storm Control Interface 
Configuration.