Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 用户手册
Manage Device Security
556
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
9.
Use Rate Limit (pps) to specify rate limit value for DHCP snooping purposes.
If the incoming rate of DHCP packets exceeds the value of this for consecutive burst
interval seconds, the port is shut down. If this value is N/A, then burst interval has no
meaning, hence it is disabled. The default value is N/A. It can be set to value –1, which
means N/A. The range of rate limit is 0 to 300.
interval seconds, the port is shut down. If this value is N/A, then burst interval has no
meaning, hence it is disabled. The default value is N/A. It can be set to value –1, which
means N/A. The range of rate limit is 0 to 300.
10.
Use Burst Interval (secs) to specify the burst interval value for rate limiting purpose on this
interface.
If the rate limit is N/A, burst interval has no meaning and it is N/A. The default value is
N/A. It can be set to –1, which means N/A. The range of Burst Interval is 1 to 15.
N/A. It can be set to –1, which means N/A. The range of Burst Interval is 1 to 15.
11.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure a Static DHCP Snooping Binding
To configure a static snooping binding:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Control > DHCP Snooping > Binding Configuration.
6.
To configure a static binding, specify the following:
a.
From the Interface menu, select the interface.