Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 用户手册
Configuration Examples
693
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
MSTP Example Configuration
This example shows how to create an MSTP instance on the switch. The example network
includes three different switches that serve different locations in the network. In this example,
ports 1/0/1-1/0/5 are connected to host stations, so those links are not subject to network
loops. Ports 1/0/6–1/0/8 are connected across switches 1, 2 and 3.
includes three different switches that serve different locations in the network. In this example,
ports 1/0/1-1/0/5 are connected to host stations, so those links are not subject to network
loops. Ports 1/0/6–1/0/8 are connected across switches 1, 2 and 3.
Figure 2. MSTP sample configuration
Perform the following procedures on each switch to configure MSTP:
1.
Use the VLAN Configuration page to create VLANs 300 and 500 (see
2.
Use the VLAN Membership page to include ports 1/0/1–1/0/8 as tagged (T) or untagged (U)
3.
From the STP Configuration page, enable the Spanning Tree State option (see
Use the default values for the rest of the STP configuration settings. By default, the STP
Operation mode is MSTP and the Configuration Name is the switch MAC address.
Operation mode is MSTP and the Configuration Name is the switch MAC address.
4.
From the CST Configuration page, set the Bridge Priority value for each of the three
switches to force Switch 1 to be the root bridge:
•
Switch 1: 4096
•
Switch 2: 12288
•
Switch 3: 20480
Note:
Bridge priority values are multiples of 4096.