Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 软件指南

You can manually configure the IP address of the switch through a console port by using the 
Easy Setup Wizard (ezconfig). The switch provides a mini USB console port and an RJ-45 
RS232 console port.

The ezconfig utility is an interactive utility that provides a simplified procedure for setting up 
the following basic switch settings:

Switch management interface IP address

Switch OOB port (service port) IP address

Switch admin user password

Switch name and location

You can enter ezconfig either in Global Config mode (#) or in Display mode (>). 

At any point in the setup, you can type Q to abort the program. ezconfig checks for any 

changes and prompts you to save the changes.



Connect a computer with a Windows, MAC, or Linux operating system and a terminal 
emulation program or a VT100/ANSI terminal and open the appropriate COM port.

When the terminal interface initializes, the user login prompt displays.

Enter your user name and password.

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Enter the ezconfig command.

The utility displays the following text:

(Switch) >ezconfig

NETGEAR EZ Configuration Utility

--------------------------------

Hello and Welcome!

This utility will walk you through assigning the IP address for 

the switch management CPU. It will allow you to save the changes 

at the end. After the session, simply use the newly assigned IP 

address to access the Web GUI using any public domain Web browser.