Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 软件指南

Example: The following shows example CLI display output for the command.

(NETGEAR Switch) #show openflow table-status openflow13

Flow Table..................................... 60

Flow Table Name................................ Openflow 1.3

Maximum Size................................... 1920

Number of  Entries............................. 0

Hardware Entries............................... 0

Software-Only Entries.......................... 0

Waiting for Space Entries...................... 0

Flow Insertion Count........................... 0

Flow Deletion Count............................ 0

Insertion Failure Count........................ 0

Flow Table Description......................... The Openflow 1.3 table matches on the 
packet layer-2 header, including DA-MAC, SA-MAC, VLAN, Vlan priority ether type; layer-3 
header, including SRC-IP, DST-IP, IP protocol, IP-TOS; layer-4 header, including UDP/TCP 
source and dest port, ICMP type, and code; SRC-IPv6, DST_IPv6, IPv6 Flow Label,ECN, 
ICMPv6 type and code, source L4 Port for TCP / UDP / SCTP and input port including 
physical port and LAG port.

Cloud managed commands enable you to manage the interaction of the switch with a cloud 
management agent.

The switch maintains several configuration parameters for a cloud management agent. 
These parameters are handled like any other configuration parameters but are not used by 
the switch itself. The following table lists these parameters.

Mode

Overall administrative mode 
for cloud managed 
operation.

0. Disabled

1. Enabled

0

Proxy IP Address

The IPv4 or IPv6 address of 
a proxy server used to 
access the public network.

Any valid IPv4 or IPv6 host address.

Address family:

0. None

1. INET

2. INET6

An IP address of 0.0.0.0 with an address 

family type of None implies that this 
parameter is not set.

0.0.0.0

0