Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 软件指南
Utility Commands
274
M4200 and M4300 Series ProSAFE Managed Switches
Host Total Elapsed Type Addresses
--------------- -------- ------ -------- ---------------
www.stanford.edu 72 3 IP 171.64.14.203
IP Address Conflict Commands
The commands in this section help troubleshoot IP address conflicts.
ip address-conflict-detect run
This command triggers the switch to run active address conflict detection by sending
gratuitous ARP packets for IPv4 addresses on the switch.
gratuitous ARP packets for IPv4 addresses on the switch.
show ip address-conflict
This command displays the status information corresponding to the last detected address
conflict.
conflict.
clear ip address-conflict-detect
This command clears the detected address conflict status information.
Format
ip address-conflict-detect run
Mode
Global Config
Format
show ip address-conflict
Modes
Privileged EXEC
Term
Definition
Address Conflict Detection Status
Identifies whether the switch has detected an address conflict on any IP address.
Last Conflicting IP Address
The IP Address that was last detected as conflicting on any interface.
Last Conflicting MAC Address
The MAC Address of the conflicting host that was last detected on any interface.
Time Since Conflict Detected
The time in days, hours, minutes and seconds since the last address conflict was
detected.
detected.
Format
clear ip address-conflict-detect
Modes
Privileged EXEC