Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 软件指南

This command displays the source MAC address of the last packet discarded on a locked 
port. Instead of unit/slot/port, lag lag-intf-num can be used as an alternate way to 
specify the LAG interface, in which lag-intf-num is the LAG port number.

This section describes the command you use to configure Link Layer Discovery Protocol 
(LLDP), which is defined in the IEEE 802.1AB specification. LLDP allows stations on an 802 
LAN to advertise major capabilities and physical descriptions. The advertisements allow a 
network management system (NMS) to access and display this information. 

Use this command to enable the LLDP advertise capability on an interface or a range of 
interfaces. 

Use this command to return the local data transmission capability to the default.

Format

show port-security violation

 

{unit/slot/port | lag lag-intf-num}

Mode

Privileged EXEC

MAC Address

The source MAC address of the last frame that was discarded at a locked port.

VLAN ID

The VLAN ID, if applicable, associated with the MAC address of the last frame that was discarded at 
a locked port.

Default

disabled

Format

lldp transmit

Mode

Interface Config

Format

no lldp transmit

Mode

Interface Config