Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 软件指南

This section describes the commands you use to configure the console port. You can use a 
serial cable to connect a management host directly to the console port of the switch.

This command gives you access to the Global Config mode. From the Global Config mode, 
you can configure a variety of system settings, including user accounts. From the Global 
Config mode, you can enter other command modes, including Line Config mode.

This command gives you access to the Line Console mode, which allows you to configure 
various Telnet settings and the console port, as well as to configure console login/enable 
authentication.

((NETGEAR Switch)(config)#line telnet

(NETGEAR Switch)(config-telnet)#

This command specifies the communication rate of the terminal interface. The supported 
rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.

Format

configure

Mode

Privileged EXEC

Format

line {console | telnet | ssh}

Mode

Global Config

console

Console terminal line.

telnet

Virtual terminal for remote console access (Telnet).

ssh

Virtual terminal for secured remote console access (SSH).

Default

9600

Format

serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200}

Mode

Line Config