Netgear M4300-52G (GSM4352S) - Stackable Managed Switch with 48x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 软件指南

Use this command to generate an RSA key pair for SSH. The new key files will overwrite any 
existing generated or downloaded RSA key files.

Use this command to delete the RSA key files from the device.

Use this command to generate a DSA key pair for SSH. The new key files will overwrite any 
existing generated or downloaded DSA key files.

Use this command to delete the DSA key files from the device.

You can use a management Access Control List (ACL) to help control access to the switch 
management interface. A management ACL can help ensure that only known and trusted 
devices are allowed to remotely manage the switch via TCP/IP. Management ACLs are only 
configurable on IP (in-band) interfaces, not on the service port.

When a management ACL is enabled, incoming TCP packets initiating a connection (TCP 
SYN) and all UDP packets are filtered based on their source IP address and destination port. 
When the management ACL is disabled, incoming TCP/UDP packets are not filtered and are 
processed normally.

This command creates a management ACL. The management ACL name can be up to 
32 alphanumeric characters. Executing this command enters into access-list configuration 

Format

crypto key generate rsa

Mode

Global Config

Format

no crypto key generate rsa

Mode

Global Config

Format

crypto key generate dsa

Mode

Global Config

Format

no crypto key generate dsa

Mode

Global Config