Netgear GSM7328Sv2 - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch 管理员指南

In the VLAN field, enter 5.

c.  Click Add.

Add port 11 to the group vlan_ipx. 

a. Select Switching > VLAN > Advanced > Protocol Based VLAN Group 

Membership. A screen similar to the following displays.

b.  In the Group ID list, select 1.

c.  Click the gray box under port 11. A check mark displays in the box.

d.  Click the Apply button.

Add port 11 to the group vlan_ip.

a. Select Switching > VLAN > Advanced > Protocol Based VLAN Group 

Membership. A screen similar to the following displays.

b.  In the Group ID list, select 2.

c.  Click the gray box under port 11. A check mark displays in the box.

d.  Click Apply.

Virtual VLANs: Create an IP Subnet–Based VLAN

In an IP subnet–based VLAN, all the end workstations in an IP subnet are assigned to the 
same VLAN. In this VLAN, users can move their workstations without reconfiguring their 
network addresses. IP subnet VLANs are based on Layer 3 information from packet headers. 
The switch makes use of the network-layer address (for example, the subnet address for 
TCP/IP networks) in determining VLAN membership. If a packet is untagged or priority 
tagged, the switch associates the packet with any matching IP subnet classification. If no IP