Netgear GSM7328Sv2 - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch 管理员指南
62
|
Chapter 6. RIP
ProSafe 7000 Managed Switch Release 8.0.3
Web Interface: Configure VLAN Routing with RIP Support
1.
Configure a VLAN and include ports 1/0/2 in the VLAN:
a. Select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following
displays.
b. Enter the following information:
•
In the Vlan ID field, enter 10.
•
In the IP Address field, enter 192.150.3.1.
•
In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display:
d. Click the gray box under port 2 until T displays. The T specifies that the egress
packet is tagged for the port.
e.
Click Apply to save the VLAN that includes ports 2.
2.
Configure a VLAN, and include port 1/0/3 in the VLAN:
a. Select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following
displays.
b. Enter the following information:
•
In the Vlan ID field, enter 20.
•
In the IP Address field, enter 192.150.4.1.
•
In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.