KitchenAid 19 Cu. Ft. Standard-Depth Bottom-Freezer Refrigerator, Architect® Series II 使用和维护

Electronic Controls

For your convenience, your refrigerator and freezer controls are 
preset at the factory. When you first install your refrigerator, make 
sure the controls are still set to the recommended setting as 
shown.

■

To turn the refrigerator off, press the freezer Minus (-) touch 
pad until a dash (-) appears in both the refrigerator and freezer 
displays. Neither compartment will cool. 

The temperature control range for each compartment is 1 through 
7 (coldest). 
Press the Plus (+) or Minus (-) touch pads to adjust the 
temperature. Except when starting the refrigerator, do not adjust 
either control more than one setting at a time. Wait 24 hours 
between adjustments for the temperature to stabilize.
If you need to adjust the temperature in either the refrigerator or 
freezer compartment, use the settings listed in the chart below as 
a guide. 

Digital Controls

For your convenience, your temperature controls are preset at the 
factory. When you first install your refrigerator, make sure the 
controls are still set to the recommended set points as shown.
IMPORTANT:  When the power is on, the temperature display 
shows the set point temperature of the compartment.

■

Press the freezer (+) touch pad repeatedly until “OFF” appears 
in the freezer display. Allow a few seconds for the refrigerator 
to shut off. Neither compartment will cool. 

■

Press either the refrigerator or freezer (-) touch pad to turn on 
the refrigerator.

The REFRIGERATOR control adjusts the refrigerator compartment 
temperature. The FREEZER control adjusts the freezer 
compartment temperature. 
If you need to adjust the temperature in either the refrigerator or 
freezer compartment, use the settings listed in the chart as a 
guide.

The first touch of the (+) or (-) touch pad displays the current 
temperature set point. 

■

Press the (+) or (-) touch pads until the desired temperature 
set point is displayed.

NOTE: Except when first turning on the refrigerator, do not 
adjust either temperature control more than one setting at a 
time. Wait 24 hours between adjustments for the temperature 
to stabilize. 

The Max Ice feature assists with temporary periods of heavy ice 
use by increasing ice production.

■

Press the Max Ice feature touch pad to set the freezer to the 
lowest temperature setting. Press the Max Ice feature touch 
pad again to return to the normal freezer set point.

NOTE: The Max Ice feature will automatically shut off in 
approximately 24 hours. 

The Humidity Control feature turns on a heater to help reduce 
moisture on the door hinge seal. Use in humid environments or 
when you notice moisture on the door hinge seal. The refrigerator 
uses more energy when Humidity Control is on.

■

Press Humidity Control when the environment is warm and 
more humid, or if you notice moisture on the door hinge seal. 
The indicator light will be lit when humidity control is ON. 

■

Press Humidity Control to save energy when the environment 
is less humid. 

REFRIGERATOR too warm

Adjust REFRIGERATOR 
Control one setting higher 

FREEZER too warm/to little 
ice

Adjust FREEZER Control one 
setting higher

REFRIGERATOR too cold

Adjust REFRIGERATOR 
Control one setting lower

FREEZER too cold

Adjust FREEZER Control one 
setting lower 

REFRIGERATOR too warm

REFRIGERATOR Control 
1° lower 

FREEZER too warm/too little ice 

Adjust FREEZER 
Control 1° lower

REFRIGERATOR too cold

Adjust REFRIGERATOR 
Control 1° higher

FREEZER too cold

Adjust FREEZER 
Control 1° higher