KitchenAid 30" Concave Glass Wall Mount Range Hood 使用和维护

2.  Secure the bottom of the duct with (2) 4.2 x 8 mm screws.

1.  For non-vented (recirculating) installations only, install 

charcoal filters over metal grease filter. See the “Range 

Hood Care” section.

2.  Install metal filters. See the “Range Hood Care” section.
3.  Check the operation of the range hood blower and light. 

See the “Range Hood Use” section.

NOTE: To get the most efficient use from your new range hood, 

read the “Range Hood Use” section.

The range hood is designed to remove smoke, cooking 

vapors, and odors from the cooktop area. For best results, 

start the hood before cooking, and allow it to operate several 

minutes after the cooking is complete to clear all smoke and 

odors from the kitchen.
The hood controls are located on the front side of the canopy.

The On/Off light button controls both lights. Press once 

for ON and again for OFF.

The Blower Speed buttons turn the blower on and control the 

blower speed and sound level for quiet operation. The speed 

can be changed anytime during fan operation by pressing the 

desired Blower Speed button.
The Blower Off button turns the blower off.