KitchenAid 36" Island-Mount Canopy Hood 使用和维护

4. Place the top half of the connector box on each and screw 

the 2 halves together using the 4 screws provided for each 
connector box.

5. Using the 2 longer screws provided for each box, attach the 

assembled connector boxes to the metal flange.

1. For recirculating installations only, install charcoal filter from 

Non-vented (recirculating) Chimney Kit behind the center 
grease filter by inserting and locking it into place.

2. Install grease filters using 2 hands by first pulling and turning 

the knob to the left so that the locking lever does not protrude 
from the filter.

3. Insert the opposite end of the filter into the retaining channel.

4. Insert knob end and turn knob to the right to lock the filter 

into place.

5. Repeat for remaining filters.

6. Reconnect power.

1. Press the light button (F) to turn on the light, press again to 

turn light off.

2. Press the night light button (G) to turn on the night light, press 

again to turn night light off.

3. Press the On/Off button (A) to turn the fan on. The speed 

setting will appear in the display.

4. Press the “plus” (+) or “minus” (-) minus buttons to increase 

or decrease the fan speed.

5. Press the On/Off button (A) to turn off the fan.

6. If range hood does not operate, check to see whether a 

circuit breaker has tripped or a household fuse has blown.

NOTE: To get the most efficient use from your new range hood, 
read the “Range Hood Use” section.

A

B

B

A

B

C

D

E

F

G