KitchenAid 24'' Wine Cellar, Left-Hand Door Swing, Architect® Series II 使用和维护

4. Wash stainless steel and painted metal exteriors with a clean 

sponge or soft cloth and a mild detergent in warm water. Do 
not use abrasive or harsh cleaners, or cleaners containing 
chlorine. These can scratch or damage materials. Dry 
thoroughly with a soft cloth. 
NOTE: To keep your stainless steel wine cellar looking like 
new and to remove minor scuffs or marks, it is suggested that 
you use the manufacturer’s approved Stainless Steel Cleaner 
and Polish. To order the cleaner, see “Accessories.”

IMPORTANT: This cleaner is for stainless steel parts only! 

Do not allow the Stainless Steel Cleaner and Polish to come 
into contact with any plastic parts such as the trim pieces, 
dispenser covers or door gaskets. If unintentional contact 
does occur, clean plastic part with a sponge and mild 
detergent in warm water. Dry thoroughly with a soft cloth.

5. Replace the racks. 
6. Clean the condenser coils regularly. They are located behind 

the base grille. Coils may need to be cleaned as often as every 
other month. This may help save energy.

■

Remove the base grille. See “Base Grille.”

■

Use a vacuum cleaner with an extended attachment to 
clean the condenser coils when they are dusty or dirty. 

■

Replace the base grille.

7. Plug in wine cellar or reconnect power.

Changing the Light Bulb

IMPORTANT: Depending on your model, the wine cellar is lit by 
either Style 1 - incandescent light bulbs or Style 2 - LED lights. 
Follow the instructions specific to your model.

NOTE: Not all appliance bulbs will fit your wine cellar. Be sure to 
replace the bulb with one of the same size, shape, and wattage.

1. Unplug wine cellar or disconnect power.
2. Using a Phillips screwdriver, remove the screw located at the 

back of the light shield. Pull the light shield back to remove the 
tabs from the appliance. Remove the light shield. 

3. Replace the bulb.
4. Reinstall the light shield by inserting the tabs. Align the holes 

and insert the screw. Tighten the screw.

5. Plug in wine cellar or reconnect power.

The light is an LED which does not need to be replaced. If the LED 
does not illuminate when the door is opened, call Service to 
replace the light. See “Assistance or Service” for contact 
information.

Vacation and Moving Care

If you choose to turn the wine cellar off before you leave, follow 
these steps.
1. Remove all wine bottles from the wine cellar.
2. Unplug the wine cellar. 
3. Clean the wine cellar. See “Cleaning.”
4. Tape a rubber or wood block to the top of the door to prop it 

open far enough for air to get in. This stops odor and mold 
from building up.

When you are moving your wine cellar to a new home, follow 
these steps to prepare it for the move.
1. Remove all wine bottles from the wine cellar.
2. Unplug the wine cellar.
3. Clean, wipe, and dry it thoroughly.
4. Take out all removable parts, wrap them well, and tape them 

together so they don’t shift and rattle during the move.

5. Tape the doors shut and tape the power cord to the wine 

cellar.

When you get to your new home, put everything back and refer to 
the “Installation Instructions” section for preparation instructions.

A

B

C