KitchenAid 30'' Wall-Mount 600 CFM Canopy Hood, Architect® Series II 使用和维护
10
Install Vent Covers
When using both upper and lower vent covers, push lower cover
down onto hood and lift upper cover to ceiling and install with (2)
4 x 8 mm screws.
down onto hood and lift upper cover to ceiling and install with (2)
4 x 8 mm screws.
NOTE: For vented installations, upper vent cover may be
reversed to hide slots.
reversed to hide slots.
Secure the bottom of the duct with (2) 4 x 8 mm assembly
screws.
screws.
Complete Installation
1. For non-vented (recirculating) installations only, install
charcoal filters over grille on blower housing. See the “Range
Hood Care” section.
Hood Care” section.
2. Install metal filters. See the “Range Hood Care” section.
3. Check the operation of the range hood blower and light. See
the “Range Hood Use” section.
NOTE: To get the most efficient use from your new range hood,
read the “Range Hood Use” section.
read the “Range Hood Use” section.
A. Upper vent cover
B. Lower vent cover
B. Lower vent cover
C. 4 x 8 mm screws
D. Bracket
D. Bracket
A
B
C
D