KitchenAid 24" Wall-Mount Canopy 尺寸示意图

VENTING METHODS (cont.)
This canopy hood is factory set for venting through the roof or 

wall.
A 6" (15.2 cm) round vent system is needed for installation (not 

included). The hood exhaust opening is 6" (15.2 cm) round.
NOTE: Flexible vent is not recommended. Flexible vent 

creates back pressure and air turbulence that greatly reduce 

performance.
Vent system can terminate either through the roof or wall. To 

vent through a wall, a 90° elbow is needed.
Rear discharge

A 90° elbow may be installed immediately above the hood.
For Non-Vented (recirculating) Installations

If it is not possible to vent cooking fumes and vapors to the 

outside, the hood can be used in the non-vented (recirculating) 

version, using a Recirculation Kit (which includes charcoal 

filters and a deflector). 

Calculating Vent System Length
To calculate the length of the system you need, add the 

equivalent feet (meters) for each vent piece used in the system.

45° elbow

2.5 ft (0.8 m)

90° elbow

5.0 ft (1.5 m)

Maximum equivalent vent length is 35 ft (10.7 m).

Because Whirlpool Corporation policy includes a continuous commitment to improve our 

products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see 

Installation Instructions packed with product. Specifications subject to 

change without notice.

W10444175C

03/2015

The following example falls within the maximum recommended 

vent length of 35 ft (10.7 m).

1 - 90° elbow

= 5.0 ft (1.5 m)

1 - wall cap

= 0.0 ft (0.0 m)

8 ft (2.4 m) straight

= 8.0 ft (2.4 m)

Length of system

= 13.0 ft (3.9 m)

Page 2 of 2