KitchenAid 30-Inch 4-Burner Dual Fuel Slide In Range, Architect® Series II 安装指南

Remove the warming or storage drawer to gain access to the 
lower section of the range. This will be necessary for some of the 
following installation steps.

1. Open drawer to its fully open position.

2. Locate the black loops on both sides of the drawer.

3. Pull both loops forward at the same time, then pull drawer out 

another inch.

4. Holding the drawer by its sides, not its front, gently pull it all 

the way out.

1. Disconnect power.

2. Remove the terminal block cover screws located on the back 

of the range. Pull cover down and toward you to remove 
cover. 

3. Remove plastic tag holding three 10-32 hex nuts from the 

middle post of the terminal block.

4. Add strain relief.

A

A

B