KitchenAid 2.0 cu. ft. Capacity 1,200 Watts Architect® Series II 安装指南

4. Secure vent deflector with 2 mounting screws (1 on each end).

 

5. Replace vent screen

.

1. Locate the wall damper vent cover on the back of the 

microwave oven.

2. Using diagonal wire cutting pliers, gently snip out the damper 

vent cover at the perforations.

3. Save the cover for possible change of venting method in the 

future.

4. Position the damper assembly so that the long tab slides into 

the slot on the right side of the damper vent opening, as 
shown. Then secure with mounting screw.

1. Locate the roof damper vent cover on the top of the 

microwave oven.

2. Using diagonal wire cutting pliers, gently snip out the damper 

vent cover at the perforations.

3. Save the cover for possible change of venting method in the 

future.

NOTE: Do not install damper assembly at this time.

A         B

A     B         C              D

A        B                                                 C

A                                                  B     C

D