KitchenAid 2.0 cu. ft. Capacity 1,200 Watts Architect® Series II 尺寸示意图
INSTALLATION DIMENSIONS
PRODUCT DIMENSIONS
18
¹⁄₄
"
(46.4 cm)
18
¹⁄₄
"
(46.4 cm)
29
⁷⁄₈
" (76.0 cm)
15
¹⁄₂
"
(39.4 cm)
A. 2" x 4" (5.1 x 10.2 cm) wall stud
B. Grounded 3 prong outlet
B. Grounded 3 prong outlet
12" (30.5 cm) min.
13" (33.0 cm) max.
13" (33.0 cm) max.
30"
(76.2 cm)
min.
A B
upper cabinet and
side cabinet depth
side cabinet depth
33"
(83.8 cm)
typical*
69" (175.3 cm) min.
NOTE:
The grounded 3 prong outlet must be inside the upper cabinet.
See “Electrical Requirements” section.
* 33" (83.8 cm) is typical for 69" (175.3 cm) installation height. Exact
dimension may vary depending on type of range/cooktop below.
LOCATION REQUIREMENTS
Special Requirements
For Wall Venting Installation Only:
●
Cutout must be free of any obstructions so that the vent fits properly,
and the damper blade opens freely and fully.
and the damper blade opens freely and fully.
For Roof Venting Installation Only:
●
If you are using a rectangular to round transition piece, 3" (7.6 cm)
clearance needs to exist above the microwave oven so that the damper
blade can open freely and fully. See “Rectangular to Round Transition”
illustration in “Venting Design Specifications” section.
clearance needs to exist above the microwave oven so that the damper
blade can open freely and fully. See “Rectangular to Round Transition”
illustration in “Venting Design Specifications” section.
Dimension Requirements
For proper ventilation, the vent screen must be free and clear of the
surrounding cabinetry. The maximum allowable upper cabinet and side
cabinet depth (from rear wall to front of cabinetry) must be no greater
than the depth of the microwave oven metal outer wrapper (from back of
microwave oven to the vent screen).
surrounding cabinetry. The maximum allowable upper cabinet and side
cabinet depth (from rear wall to front of cabinetry) must be no greater
than the depth of the microwave oven metal outer wrapper (from back of
microwave oven to the vent screen).
NOTE:
If the upper cabinet is deeper than the maximum allowable depth
(see “Installation Dimensions”), then the installer must space the
microwave oven forward so that the vent screen is free and clear of any
surrounding cabinetry.
microwave oven forward so that the vent screen is free and clear of any
surrounding cabinetry.
A. Microwave oven metal outer wrapper
B. Vent screen
B. Vent screen
A
B
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Instructions packed with product. Specifications subject to change without notice.
Ref. W10502369A
11/6/12
Page 2 of 2