Eaton External Battery Interconnect 103007247-5591 产品宣传页
产品代码
103007247-5591
Eaton BladeUPS External
Battery Interconnect
Powerware series
For use with 400V BladeUPS Systems —runtime
can be extended for hours.
Features
• Doubles the amount of runtime available
• Can be used in parallel configuration when each unit
• Can be used in parallel configuration when each unit
has an interconnect
• Reliable source in environments where power sources
are unreliable
The Eaton
®
BladeUPS
®
400V uninterruptible power system
(UPS) is compatible with a customer-supplied external battery
only when used with the External Battery Interconnect. The
addition of customer-supplied external batteries can extend
battery runtime. Please note, this arrangement of customer-
supplied external battery and External Battery Interconnect
is not for use with the BladeUPS 208V module.
only when used with the External Battery Interconnect. The
addition of customer-supplied external batteries can extend
battery runtime. Please note, this arrangement of customer-
supplied external battery and External Battery Interconnect
is not for use with the BladeUPS 208V module.
The External Battery Interconnect is a DC connection box that
provides a landing for the wires from an external battery. The
External Battery Interconnect converts external battery input
wires to a plug that is compatible with the BladeUPS 400V
(see drawing on page 2).
provides a landing for the wires from an external battery. The
External Battery Interconnect converts external battery input
wires to a plug that is compatible with the BladeUPS 400V
(see drawing on page 2).
280W/cell + Internal Battery
Time (min)
Load (Watts)
•
•
•
• • • •
•
250
200
150
100
50
0
4000
6000 8000 10000 12000 14000
Please note: This run time was achieved by using External Battery (Powerware
PWHR12280W4FR) for our testing. Should you use another battery, runtimes may vary.
Runtime Table