Zanussi ZOP37901XK 用户手册

The display shows "C3".

The cleaning function does not

operate. You did not fully close

the door, or the door lock is de-

fective.

Fully close the door.

The display shows "F102".

• You did not fully close the

door.

• The door lock is defective.

• Fully close the door.

• Deactivate the oven with the

house fuse or the safety

switch in the fuse box and ac-

tivate it again.

• If the display shows "F102"

again, contact the Customer

Care Department.

The display shows an error code

that is not in this table. 

There is an electrical fault.

• Deactivate the oven with the

house fuse or the safety

switch in the fuse box and ac-

tivate it again.

• If the display shows the error

code again, contact the Cus-

tomer Care Department.

The appliance is activated and

does not heat up. The fan does

not operate. The display shows 

"Demo".

The demo mode is activated.

1. Deactivate the oven.

2. Press and hold the button

.

3. The first digit on the display

and Demo indicator start to

blink.

4. Enter the code 2468 by

pressing the buttons   or

 to change the values and

press   to confirm.

5. The next digit starts to blink.

6. Demo mode deactivates

when you confirm the last

digit and the code is correct.

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre.

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the appliance cavity. Do not remove

the rating plate from the appliance cavity.

Model (MOD.)

.........................................

Product number (PNC)

.........................................

Serial number (S.N.)

.........................................