Zanussi ZDM17301WA 用户手册

3. Close the detergent dispenser. Press the lid

until the release button locks into position.

4. If the programme has a prewash phase, put a

small quantity of detergent (approximately 3 g)

on the lid of the detergent dispenser.

Detergent tablets do not fully dissolve

with short programmes and detergent

residues can remain on the dishes

when the programme is completed.

We recommend that you use

detergent tablets with long

programmes.

SALT AND RINSE AID
1. Fill the salt container and the rinse aid

dispenser.

2. Start a programme without loading dishes.

3. When the programme is completed, adjust the

position of the rinse aid dispenser.

CAUTION! Only use rinse aid

specifically designed for dishwashers.

Rinse aid helps to dry the dishes

without streaks and stains.

The rinse aid is automatically released

during the last rinsing phase.

Filling the rinse aid dispenser
1. Turn the cap (F) counterclockwise and remove

it.

2. Fill the rinse aid dispenser (G) with rinse aid.

The mark ''MAX'' shows the maximum level.

3. Remove the spilled rinse aid with an absorbent

cloth to prevent too much foam during the

programme.

4. Put the cap on again and turn it clockwise until

it locks. Make sure that the signs on the cap

and on the dispenser are aligned.

Fill the rinse aid dispenser when the rinse aid

indicator on the display comes on.

Adjust the rinse aid dosage
Factory setting: position 3.
You can set the rinse aid dosage between position

1 (lowest dosage) and position 4 (highest dosage).
Turn the rinse aid selector (H) to increase or

decrease the dosage.