Bosch TES-50621 RW 用户手册

下载
页码 124
17
TES506..   06/2011
en
Problem
Cause
Solution
Display shows
Refill beans! 
although 
the bean container (1) is full, 
or the grinding unit does not 
grind the beans.
Beans are not falling into 
the grinding unit 
(beans too oily).
Gently tap the bean con-
tainer (1).
Change the type of coffee if 
necessary.
When the bean container 
(1) is empty, wipe it with a 
dry cloth.
No hot water dispensed.
The milk frother (6) is soiled. Clean the milk frother (6), 
see “Maintenance and daily 
cleaning”.
Too little or no milk froth 
or 
the milk frother (6) does not 
draw the milk in.
The milk frother (6) is soiled. Clean the milk frother (6), 
see “Maintenance and daily 
cleaning”.
Build-up of limescale in the 
appliance.
Descale the appliance.
Milk unsuitable for frothing.
Use low-fat milk (1.5 % fat).
The milk frother (6) is not 
correctly assembled.
Wet the milk frother parts 
and press together firmly.
Coffee dispensing slows to 
a trickle or stops completely.
Coffee is ground too finely. 
Pre-ground coffee is too 
fine.
Adjust the grinding unit to a 
coarser setting. Use coarser 
pre-ground coffee.
Build-up of limescale in the 
appliance.
Descale the appliance.
Coffee has no “crema”.
Unsuitable type of coffee.
Use a type of coffee with a 
higher proportion of robusta 
beans.
The beans are no longer 
fresh.
Use fresh beans.
The grinding setting is not 
suitable for the beans.
Adjust grinding setting to 
fine.
Coffee is too “acidic”.
The grinding setting is too 
coarse or the pre-ground 
coffee is too coarse.
Adjust the grinding unit to a 
finer setting or use finer pre-
ground coffee.
Unsuitable type of coffee.
Use a darker roast.
If you are unable to solve the problem, please call the hotline.
Simple troubleshooting
TES506_1RW.indb   17
16.06.2011   13:51:09