Cisco Cisco Expressway 安装指南
■
The system name of the Cisco Expressway. This is used by the Cisco TelePresence Management Suite (Cisco
TMS) to identify the system. This can be set from the System administration page (System > Administration)
on the web interface.
TMS) to identify the system. This can be set from the System administration page (System > Administration)
on the web interface.
■
Automatic discovery. If you have multiple Cisco Expressways in the same network you may want to disable
automatic discovery on some of them. This can be set from the H.323 page on the web interface
(Configuration > Protocols > H.323).
automatic discovery on some of them. This can be set from the H.323 page on the web interface
(Configuration > Protocols > H.323).
■
The DNS server address(es), if URI dialing or Fully Qualified Domain Names (FQDNs) are to be used. This can
be set from the DNS page on the web interface (System > DNS).
be set from the DNS page on the web interface (System > DNS).
See the online help or Cisco Expressway Administrator Guide for more information on these configuration options.
Check for Updates and Upgrading
To check whether your Cisco Expressway has the latest software installed go to
and navigate to the Cisco Expressway.
See the Cisco Expressway Administrator Guide for information on how to upgrade.
Caution:
The CE1100 only supports software version X8.6.1 or later. If you are upgrading your hardware, do not
downgrade to an unsupported software version.
15
Cisco Expressway CE1100 Appliance Installation Guide
Configure