Cisco Cisco Expressway 安装指南
1.
Log in to the Expressway through a web browser, with username
admin
and password
TANDBERG
.
2.
Follow the service setup wizard to define the purpose of the system, apply the release and options keys, then
restart the system.
restart the system.
The wizard helps you through the configuration described in the rest of this topic, so you can ignore the rest of
the topic if you are using the wizard.
the topic if you are using the wizard.
If you do not want the wizard to guide you, click Skip Service Setup Wizard, then follow the rest of these
instructions.
instructions.
3.
Get release and option keys:
a.
Go to the Option keys page (Maintenance > Option keys).
b.
Copy the Serial number.
c.
Use this serial number to order release and option keys for this VM Expressway.
When you have the release and option keys:
1.
Log in to the Expressway via a web browser as admin.
2.
Enter the release and option keys:
a.
Go to the Option keys page (Maintenance > Option keys).
b.
Enter the release key provided in the Release key field.
c.
Click Set release key.
d.
For each option key provided:
1.
Enter the option key value in the Add option key field.
2.
Click Add option.
3.
Reboot the Expressway to activate the licenses:
a.
Go to the Restart options page (Maintenance > Restart options).
b.
Click Reboot.
4.
After the reboot, log in to the web interface and configure the Expressway, including changing any default
passwords, configuring DNS, NTP, zones, search rules and so on as required.
passwords, configuring DNS, NTP, zones, search rules and so on as required.
Expressway ready for operation.
5.
After the Expressway has been configured it is good practice to backup the Expressway configuration using
the Expressway backup facility.
the Expressway backup facility.
Hardware References
Serial Interface
A VM Expressway has no physical serial interface; the serial interface is accessible through the console tab of the VM
guest.
guest.
You can use CTRL+ALT to exit from the Console window (this is identified in the bottom right corner of the vSphere
Client window).
Client window).
Ethernet Interfaces (NICs)
In VM Expressway the LAN interfaces are Virtual NICs. Appropriate drivers are set up as VM Expressway is installed;
configuration of IP addresses is carried out through the standard Expressway interface.
configuration of IP addresses is carried out through the standard Expressway interface.
VM Expressway allocates 3 virtual NICs:
17
Cisco Expressway on Virtual Machine Installation Guide
Hardware References