Cisco Cisco 7600 2-Port OC-12c STM-4c ATM Optical Services Module 数据表
© 2004 Cisco Systems, Inc. All right reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com
Page 8 of 10
Indicators and Interfaces
•
Four LEDs per port:
–
Port Active: Green—when port is enabled and active; Off when port is not enabled
–
Carrier/Alarm: Green if valid SONET/SDH frame and no alarms; Yellow if valid SONET/SDH frame with alarms; Off if no
SONET/SDH signal
–
Tx Activity: Blinks Green (or constant) if port is transmitting data; Off when no data is transmitting
–
Rx Activity: Blinks Green (or constant) if port is receiving data; Off when no data is received
Processors and Memory
•
One 262 MHz RM7000 MIPS RISC processor for line card control and management
•
Configurable processor/route table memory options:
–
128 MB ECC SDRAM (default)
–
128 MB ECC SDRAM
–
256 MB ECC SDRAM
–
512 MB ECC SDRAM
•
One PXF IP services processors
•
Provides up to 6 Mpps of distributed IP service application per PXF IP Services Processor
Environmental Conditions
•
Operating temperature: 32 to 104° F (0 to 40° C)
•
Storage temperature: -4 to 149° F (-20 to 65° C)
•
Relative humidity: 5 to 90%, noncondensing
•
Operating altitude: -500 to 6500 ft
REGULATORY COMPLIANCE
Safety Compliance
•
UL 1950
•
CAN/CSA C22.2 No.950-95 EN 60825-1 Laser Safety (Class 1)
•
21CFR1040 Laser Safety
•
EN60950
•
IEC 60950
•
TS 001
•
AS/NZS 3260
EMC Compliance
•
FCC Part 15 (CFR 47) Class A
•
VCCI Class A
•
EN55022 Class A
•
CISPR 22 Class A
•
AS/NZS 3548 Class A
•
EN55024
•
CE Marking