Cisco Cisco Expressway
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
of this master Expressway.
On this master Expressway peer:
1. Log in to the web browser of this Expressway.
2. Go to
Status > Alarms
.
If there is an alarm that the Expressway must be restarted, go to
Maintenance > Restart options
and
then click Restart.
3. If the Expressway did not need to be restarted, ensure that maintenance mode is disabled.
a. Go to
Maintenance > Maintenance mode
.
b. Set Maintenance mode to Off.
c. Click Save.
c. Click Save.
After the master peer configuration
Go to
Status > Alarms
and ensure that all alarms are acted upon and cleared.
The setup of the new cluster (of one Expressway) is complete; add other Expressways to the cluster using
.
Cisco Expressway Cluster Creation and Maintenance Deployment Guide (X8.1)
Page 8 of 34
Setting up a new cluster of Expressway peers