Cisco Cisco Expressway 技术手册
VCS Series or Expressway Series Xconfig and
Xstatus Output Collection with PuTTY
Xstatus Output Collection with PuTTY
Document ID: 118675
Contributed by Michael Jason Wall and Adam Wamsley, Cisco TAC
Engineers.
Dec 15, 2014
Engineers.
Dec 15, 2014
Contents
Introduction
Prerequisites
Requirements
Components Used
Configure
Connect by Console
Connect via SSH
VCS and Expressway Series x8.2
Verify
Troubleshoot
Prerequisites
Requirements
Components Used
Configure
Connect by Console
Connect via SSH
VCS and Expressway Series x8.2
Verify
Troubleshoot
Introduction
This document describes how to collect the CLI output of the xconfig and xstatus xcommands from the Video
Communication Server (VCS) Series and the Expressway Series devices such as VCS−Control,
VCS−Expressway, Expressway−C, and Expressway−E, that the Cisco Technical Assistance Center (TAC)
occasionally needs to retrieve.
Communication Server (VCS) Series and the Expressway Series devices such as VCS−Control,
VCS−Expressway, Expressway−C, and Expressway−E, that the Cisco Technical Assistance Center (TAC)
occasionally needs to retrieve.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
PuTTY or similar Terminal Emulation Software such as SecureCRT, Tera Term, or similar.
•
Admin account username and password to VCS/Expressway series device.
•
RJ45−D−Sub9pin Serial Console Cable or Secure Shell (SSH) permitted in the network path.
•
Components Used
The information in this document is based on these software and hardware versions:
PuTTY (Visit the PuTTY Download Page in order to get a copy).
•
A VCS−C that runs Version 7.2.1 is used in this example which is applicable through Version 8.2.2,
which is the latest version at the current time.
which is the latest version at the current time.
•