Cisco Cisco Expressway
Change the IP address of a Peer
To change the IP address of an Expressway peer you must remove the Expressway from the cluster, change its IP
address, and then add the Expressway back into the cluster.
address, and then add the Expressway back into the cluster.
The process is as follows:
1.
Ensure that the Expressway whose IP address is to be changed is not the primary Expressway.
If it is the primary Expressway, follow the steps in
primary.
2.
3.
Change the IP address of the Expressway.
4.
.
Changing the IP address of an Expressway peer is now complete.
25
Cisco Expressway Cluster Creation and Maintenance Deployment Guide