Cisco Cisco Expressway 维护手册
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Configuring a traversal client and server
The basic steps in configuring a traversal client and server are as follows:
Step Description
On the Expressway-E, create a traversal server zone (this represents the incoming connection from the
Expressway-C). In the Username field, enter the Expressway-C’s authentication username.
Expressway-C). In the Username field, enter the Expressway-C’s authentication username.
On the Expressway-E, add the Expressway-C’s authentication username and password as credentials into
the local authentication database.
the local authentication database.
On the Expressway-C, create a traversal client zone (this represents the connection to the Expressway-E).
Enter the same authentication Username and Password as specified on the Expressway-E.
Configure all the modes and ports in the H.323 and SIP protocol sections to match identically those of the
traversal server zone on the Expressway-E.
traversal server zone on the Expressway-E.
Enter the Expressway-E’s IP address or FQDN in the Peer 1 address field.
Cisco Expressway Administrator Guide (X8.5.2)
Page 49 of 403
Firewall traversal
Configuring a traversal client and server