Cisco Cisco Expressway
Expressway System Configuration
Task 3: Setting the System Name
The System name defines the name of the Expressway. It appears in various places in the web interface and is also
used by Cisco TMS. We recommend using a name that lets you easily and uniquely identify the Expressway.
used by Cisco TMS. We recommend using a name that lets you easily and uniquely identify the Expressway.
To configure the System name:
1.
Go to System > Administration.
2.
Configure the System name as follows:
System name
Enter
EXPc
3.
Click Save.
Task 4: Configuring DNS
System Host Name
The System host name defines the DNS hostname that this system is known by. Note that this is not the fully-
qualified domain name, just the host label portion.
qualified domain name, just the host label portion.
Note that <System host name>.<Domain name> = FQDN of this Expressway.
To configure the System host name:
1.
Go to System > DNS.
2.
Configure the System host name as follows:
System host name
Enter expc
3.
Click Save.
Domain Name
The Domain name is the name to append to an unqualified host name before querying the DNS server.
To configure the Domain name:
1.
Go to System > DNS.
2.
Configure the Domain name as follows:
Domain name
Enter internal-domain.net
3.
Click Save.
The fully qualified domain name for the Cisco Expressway-C is now
expc.internal-domain.net
DNS Servers
The DNS server addresses specify the IP addresses of up to five domain name servers to be used for resolving domain
names. In either of the following cases you must specify at least one default DNS server for address resolution:
names. In either of the following cases you must specify at least one default DNS server for address resolution:
14
Cisco Expressway Registrar Deployment Guide
Expressway System Configuration