Alpine ina-n033r 用户手册
10
-EN
RDS Operation
g DN
OK
MODE
Flipper switch
T.INFO
f UP
F/SETUP
P.PTY
PTY
R.TEXT
PTY (Programme Type) Tuning
1
Press the "F" button. The "FUNC" indicator will
illuminate.
illuminate.
2
Press the PTY button to activate the PTY mode. The
Programme Type of the station being currently received
will be displayed for 5 seconds.
Programme Type of the station being currently received
will be displayed for 5 seconds.
If there is no receivable PTY broadcast, "NO PTY" will
be displayed for 5 seconds.
be displayed for 5 seconds.
NOTE
If no buttons are pressed within 5 seconds after pressing the PTY
button, the PTY mode will be automatically cancelled.
button, the PTY mode will be automatically cancelled.
3
Press the g DN and f UP buttons within 5
seconds after activating the PTY mode to choose the
desired programme type while the PTY (programme
type) is being displayed. Each press scrolls the
programme type by one.
seconds after activating the PTY mode to choose the
desired programme type while the PTY (programme
type) is being displayed. Each press scrolls the
programme type by one.
→ Light M ↔ Classics ↔ Other M ←
4
Press the PTY button within 5 seconds after selecting
the programme type to start searching for a station in
the selected programme type.
The chosen programme type indicator blinks during
searching and lights when a station is found.
the programme type to start searching for a station in
the selected programme type.
The chosen programme type indicator blinks during
searching and lights when a station is found.
If no station is found, "NO PTY" will be displayed for 2
seconds.
seconds.
5
Press the "F" button to activate the normal mode. The
"FUNC" indicator will turn off.
"FUNC" indicator will turn off.
NOTES
• Operate the unit while the "FUNC" indicator is illuminated.
If no buttons are pressed within 5 seconds, the "FUNC"
indicator will turn off.
indicator will turn off.
• When the Navigation disc (sold separately) is inserted and the
system is set in navigation mode, the selected language can be
used with the PTY (Programme Type) or P.PTY (Priority
Programme Type) language.
used with the PTY (Programme Type) or P.PTY (Priority
Programme Type) language.
PI SEEK Setting
1
Press and hold the SETUP button for at least 2
seconds. The display changes to the SETUP screen.
seconds. The display changes to the SETUP screen.
2
Move the Flipper switch up or down to select PI
SEEK. Press the OK button or MODE knob to set.
SEEK. Press the OK button or MODE knob to set.
3
Move the Flipper switch up or down to select ON or
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
OFF. Press the OK button or MODE knob to set. The
display returns to the SETUP screen.
4
Press the SETUP button again to return to normal
operation.
operation.
Receiving Traffic Information
1
Press the T.INFO button to activate the Traffic
Information mode.
To cancel the Traffic information mode, press the
T.INFO button again.
Information mode.
To cancel the Traffic information mode, press the
T.INFO button again.
2
Press the g DN or f UP button to select your
desired traffic information station. When a traffic
information station is tuned in, the TP indicator lights up.
desired traffic information station. When a traffic
information station is tuned in, the TP indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast,
the unit is set in the standby mode. When a traffic
information broadcast begins, the unit automatically
receives it and the display shows "T.INFO".
broadcast. If traffic information is not being broadcast,
the unit is set in the standby mode. When a traffic
information broadcast begins, the unit automatically
receives it and the display shows "T.INFO".
When traffic information broadcast is over, the unit will
automatically set in the standby mode.
automatically set in the standby mode.
NOTES
• If the traffic information broadcast signal falls below a
certain level, the unit remains in the receiving mode for 1
minute. If the signal remains below a certain level for over 1
minute, the "T.INFO" indicator blinks.
minute. If the signal remains below a certain level for over 1
minute, the "T.INFO" indicator blinks.
• If you do not want to listen to the traffic information being
received, lightly press the T.INFO button to skip that traffic
information message. The T.INFO mode will remain in the
ON position to receive the next traffic information message.
information message. The T.INFO mode will remain in the
ON position to receive the next traffic information message.
• If the volume level is changed while receiving traffic
information, the changed volume level will be memorized.
When traffic information is received next time, the volume
level will be automatically adjusted to the level memorized.
When traffic information is received next time, the volume
level will be automatically adjusted to the level memorized.
• In the T.INFO mode, the SEEK tuning selects only the TP stations.