Akai dps24 附文
DPS24
VERSION 1.60 ADDENDUM
Page
14
RECORD / EDIT SELECT KEYS SET WAVEFORM VIEW
When tracks are selected for editing, their waveforms are now automatically shown in the upper
waveform display. The logic is : If you select (say) Track 6, track 6’s waveform will be shown in the
upper waveform display. If you then select track 7 for editing, tracks 6 and 7 will be displayed. If you
then select Track 8, tracks 7 and 8 will be displayed.
waveform display. The logic is : If you select (say) Track 6, track 6’s waveform will be shown in the
upper waveform display. If you then select track 7 for editing, tracks 6 and 7 will be displayed. If you
then select Track 8, tracks 7 and 8 will be displayed.
It is also possible to select which tracks are displayed even though you may be editing other
tracks. This is achieved by pressing SHIFT+TRACK SELECT (e.g. press SHIFT+TRACK 1 and
SHIFT+TRACK 9 to show tracks 1 and 9 in the display). This is useful for editing one track relative
to another. For example, you might be editing Track 11 but you might want to reference that edit to
a solid kick drum on Track 1 - select Track 11 for editing (its waveform will be shown); now press
SHIFT+TRACK 1 - you will now see Track 1 and Track 11 on the display.
tracks. This is achieved by pressing SHIFT+TRACK SELECT (e.g. press SHIFT+TRACK 1 and
SHIFT+TRACK 9 to show tracks 1 and 9 in the display). This is useful for editing one track relative
to another. For example, you might be editing Track 11 but you might want to reference that edit to
a solid kick drum on Track 1 - select Track 11 for editing (its waveform will be shown); now press
SHIFT+TRACK 1 - you will now see Track 1 and Track 11 on the display.
NOTE: There is a further twist to the logic of this function!
If you select tracks for editing quickly in succession, you will see them both. However, if you wait a
while between selecting tracks for edit, only the latest track will be shown. So, for example: you
select Tracks 1 and 2 in quick succession - you will see Tracks 1 and 2’s waveform in the display.
Then you select Track 5 - track 5’s waveform will be shown. Later, you select tracks 7+8 in quick
succession - both will be shown... and so on.
while between selecting tracks for edit, only the latest track will be shown. So, for example: you
select Tracks 1 and 2 in quick succession - you will see Tracks 1 and 2’s waveform in the display.
Then you select Track 5 - track 5’s waveform will be shown. Later, you select tracks 7+8 in quick
succession - both will be shown... and so on.
ZERO CROSSING LINE IN SAMPLE ACCURATE EDIT WAVEFORM
When in EDIT mode and you are at the maximum horizontal zoom, the zero-crossing line is now
shown in the waveform display.
shown in the waveform display.
At the maximum horizontal zoom, one pixel of the LCD represents one sample. This means that
you can set sample accurate edit points.
you can set sample accurate edit points.