alohabob pc relocator ultra contro 用户手册
PC Relocator Ultra Control User Guide
31
Step-by-Step: An Automatic Relocation
Let’s step through a sample Automatic relocation to get
a feel for the program. During this example, we will
move back and forth between the Old and New PC’s.
NOTE: If you are using a single monitor to do your
relocation, we recommend (if possible) you use a KVM
switch so you don’t have to physically plug and unplug
the monitor cable between the two computers. If you
DO have a way to effectively switch back and forth, you
can perform the steps described on BOTH PC’s at the
same time – just switch back and forth.
However, if you DO NOT have a KVM switch, follow the
instructions (as clearly identified below) for the Old PC
first, then return here and start performing the steps for
the New PC.
1)
Start PC Relocator on both the Old and New PC’s.
The relocation “wizard” begins. At the Welcome
screen, click Start to continue.
The relocation “wizard” begins. At the Welcome
screen, click Start to continue.