3M X90 说明手册

Projector management via SNMP

Projector management via SNMP

When SNMP is enabled, the projector is able to send Failure/Warning Alerts to a 

specified PC.

• It is recommended that SNMP functions be carried out by a network 

administrator. 

• SNMP management software must be installed on the computer to monitor 

the projector via SNMP.

NOTE

SNMP settings

Configure the following items via a web browser to use SNMP.

• A Network Restart is required after the SNMP Trap configuration 

settings have been changed. Click 

[Network Restart] and configure the 

following items.

NOTE

(9)

 5) Click 

[Security Settings] on the main menu.

 6) Click 

[SNMP] and set the Community Name on the screen that is displayed.

• A Network Restart is required after the Community Name has been 

changed.

• Click 

[Network Restart] and configure the following items.

NOTE

 7)  Configure the settings for Trap transmission of Failures/Warnings. Click 

[Alert Settings] on the main menu and select the Failure/Warning item to be 

configured.

 )  Click the 

[Enable] check box to send out the SNMP trap for Failures/Warnings. 

Clear the 

[Enable] check box when SNMP trap transmission is not required.

 9) Click the 

[Apply] button to save the settings.

 ) Enter 

[https://192.168.1.10] into the address bar of the web browser.

 ) Enter the Administrator ID and Password and click 

[Logon].

 3) Click 

[Port Settings] on the main menu.

 4)  Click the 

[Enable] check box to open the SNMP Port. 

Set the IP address to send the SNMP Trap to when a  Failure/Warning occurs.