3M X62w 用户手册

70

 When SNMP is enabled, the projector is able to send Failure/Warning Alerts to a 
specifi ed PC. 

 • It is recommended that SNMP functions be carried out by a network 

administrator.  
 • SNMP management software must be installed on the computer to monitor 
the projector via SNMP.   

 NOTE 

 SNMP settings   (   

 

25) 

 Confi gure the following items via a web browser to use SNMP. 
  Example: If the IP address of the projector is set to 192.168.1.10/:  

 • A Network Restart is required after the SNMP Trap confi guration 

settings have been changed. Click  [Network Restart]  and confi gure the 
following items. 

 NOTE 

  5) Click  [Security Settings]  on the main menu. 
  6) Click  [SNMP]  and set the Community Name on the screen that is displayed. 

 • A Network Restart is required after the Community Name has been 

changed. 
 • Click  [Network Restart]  and confi gure the following items.   

 NOTE 

  7)  Confi gure the settings for Trap transmission of Failures/Warnings. Click 

 [Alert Settings]  on the main menu and select the Failure/Warning item to be 
confi gured. 

  8)  Click the  [Enable]  check box to send out the SNMP trap for Failures/Warnings. 

Clear the  [Enable]  check box when SNMP trap transmission is not required. 

  9) Click the  [Apply]  button to save the settings. 

  1) Enter  [http://192.168.1.10]  into the address bar of the web browser. 
  2) Enter the Administrator ID and Password and click  [Logon ]. 
  3) Click  [Port Settings]  on the main menu. 
  4)  Click the  [Enable]  check box to open the SNMP Port.

Set the IP address to send the SNMP Trap to when a  Failure/Warning occurs. 

4. Utilize projector – Advanced -

4.5 Projector management via SNMP