3M mp8030 用户手册

19



 3M 1996

3M



 Multimedia Projector MP8030

The remote control keypad (Figure 5-1) has the same buttons as the projector control panel, plus additional
buttons to control different projector functions.  To use the remote control, aim the remote toward the
projection screen and press the desired button.  The remote signal will bounce off of the projection screen and
back to the sensor on the front of the 3M

tMultimedia Projector MP8030.

Stick Switch: Move the menu stick switch up/down or left/right for mouse
(cursor control) functions.  If a menu is displaying, use the stick switch to 

move around within the menu to select options.  See the MENU 

 button.

Reset: Press RESET, to return all menu options or select (highlight) an individual
menu option, to return a single menu option to the factory defaults.  
When an RGB image is displaying, press RESET for the right mouse button function .

Standby/on: Press and hold (one second) to switch between projection 
and standby mode.  The projection lamp is off in standby mode.

Menu: Press the menu button to display the main menu.  Move the menu stick 
switch left or right as needed to select a menu.  Press the menu button again to 
remove the menu and return to the video image.

Zoom: Sizes the picture to fit the screen. Press (+) to make the projected 
image wider or (–) to reduce the image size.

Focus: Press (+) or (–) to focus the image.

Timer:  Press the timer button to display the timer and start the countdown. 
Press the timer button again to stop the timer, reset it to the full countdown time 
and return to the video image. The countdown timer can be set for up to 99 minutes. 
See the OPT. menu.

Blank: Press the blank button to remove (blank) the video image from the screen.
Press blank or pull the stick switch downward to reveal the screen image. See the 
IMAGE menu Section NO TAG to set the screen background color and the screen reveal 
rate.

Volume: Press (

ƞ) to increase or (Ɵ)  to decrease the speaker volume or external 

speaker(s) connected to the Audio-Out terminal.

 Mute: Turn the audio (speaker) sound ON (volume bar turns green) or OFF 
(volume bar turns red).

Search: Press the search button to display the next detachable input source.

Video Input: Selects the desired video input source. Press VIDEO for video 
source 1, press again for video source 2.

RGB Input: Selects the desired computer video input source. Press RGB for 
computer video source 1, press again for computer video source 2.

The remote control uses two AA batteries. Slide open the 

battery cover on the back of the remote control to access the batteries. Insert the batteries 
with the correct polarity (NO TAG).