avolites pearl expert titan 用户手册

1. Setting up the console  - Page 19

 

 

 

 

PearlExpertTitan_Man_v3.doc  29/03/2010 13:28:00 

The Pearl Expert has many useful features on its onboard display and 

on the VDU. 

 

 

Down the right hand side of the display, the functions of the A-G 

menu softkeys are listed. In this manual these are shown in square 

brackets [Like This]. If there are more functions than will fit on one 

screen, [Previous] and [Next] buttons are provided to page through 

the functions. 
The vertical bar to the left of the softkeys shows you which menu you 

are currently in. You can “latch” the menu (so that you don’t have to 

keep reselecting it) by pressing the ML Menu button. 
At the bottom left of the screen, the current function of the wheels is 

shown. If fixture attributes are being set, this shows the possible 

settings which are available on the fixtures. The horizontal bar shows 

which attributes are being controlled by each wheel and the boxes 

show the current attribute. If a chase is being controlled, information 

about the chase is shown here. 
Above this, the current fixture intensity is shown in a grid arranged 

by handle number. A dot shows a fixture that is not lit, otherwise a 

percentage brightness is shown, with “FL” for full. If the fixture is 

selected then it is shown inverted (blue-on-white), and if it has been 

changed (is in the programmer) it is shown underlined. 
The area at the top left of the screen shows instructions to the user 

and information from the console. 
The appearance of the softkeys varies to indicate the type of actions 

available: 

Menu 

softkeys 

Current 

menu name 

Information 

window 

Wheel A/B 

attributes 

List of 

settings 

Current 

selection 

Fixture 

intensities