avolites pearl expert titan 用户手册

Copyright Avolites Limited 2010

2. Patching - Page 37

PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00

2.4

Delete

2.4.1

Deleting a patched fixture

You can delete a fixture or dimmer from a preset if you patched it

accidentally or if you change your rig and want to use the preset for

something else.

1>  Enter Patch mode by pressing the Patch button.
2>  Press the blue Delete button.
3>  Press the Select button of the fixture you want to delete.
4>  The LCD will show what you are deleting. Press the Select

button again to confirm.

•

All programming for the fixture is also deleted. You cannot undo

deletion of a fixture or get the programming back by repatching

a fixture to the same handle.

2.5

Advanced options

2.5.1

Swap pan and tilt

This allows you to make the pan channel control tilt and the tilt

control pan. This is useful for moving-mirror fixtures rigged sideways.

1> Press

Patch.

2>  Press [Edit Fixtures]
3>  Press [Swap Pan and Tilt].
4>  Select the fixtures to be pan-tilt swapped. Press [Pan and Tilt

…] to select either [Swapped] or [Normal] for the selected

fixtures.

5> Press Exit when finished.

2.5.2

Invert attributes

This option inverts individual attributes of fixtures. Useful if you have

a fixture which pans right when the rest pan left, saving a trip up the

rig to set fixture options, but you can invert any attribute.

1> Press

Patch.

2>  Press [Edit Fixtures].
3>  Press [Invert Attribute]
4>  Select fixture(s) to be changed.
5>  Select the attribute to invert from the softkeys. The display

shows [Inverted] when the attribute is inverted.

6> Press Exit to finish.

•

You can change the invert on multiple fixtures by selecting

more than one, but the “Inverted” display will not show if there

is a mixture of inverted and non-inverted fixtures in the

selection.

•

Some attributes cannot be inverted.